Description and Specification for Lab Tenders
Astra Scientific Heat Transfer Through Lagged Pipe With Data Acquisition.
The Offers basic experiments Heat conduction is one of the three basic
forms of heat transfer. Kinetic energy is transferred between
neighboring atoms or molecules. The heat transport is material-bound.
This type of heat transfer is an irreversible process and transports
heat from the higher energy level, i.e. higher absolute temperature, to
the lower level with lower temperature. If the heat transport is
maintained permanently by means of the supply of heat, this is called
steady heat conduction. The most common application of heat conduction
in engineering is in heat exchangers.
The experimental unit can be used to determine basic laws and
characteristic variables of heat conduction in solid bodies by way of
experiment. The experimental unit comprises a linear and a radial
experimental setup, each equipped with a heating and cooling element.
Different measuring objects with different heat transfer properties can
be installed in the experimental setup for linear heat conduction. The
experimental unit includes with a display and control unit.
Sensors record the temperatures at all relevant points. The measured
values are read from digital displays and can be transmitted
simultaneously via USB directly to a PC, where they can be analyzed
using the software included.
FEATURES:
• Linear heat conduction (plane wall)
o Determination of temperature profiles for different materials
o Determination of the temperature profile in case of a disturbance
o Determination of the thermal conductivity λ
• Radial heat conduction
o Determination of the temperature profile
o Determination of the thermal conductivity λ
o Useful for institutions, research laboratories & insulating powder manufactures
o Functions of the software: educational software, data acquisition, system operation
SPECIFICATION:
• Linear heat conduction
• 3 measuring objects, insulated
1x DxL: 25x30mm, steel
1x DxL: 15x30mm, brass
1x DxL: 25x30mm, brass
• Heater: 140W
Radial heat conduction
• Disc DxL: 110x4mm
• Heater in the center of the disc: 125W
• Cooling coil on the outer edge of the disc
• Measuring ranges
temperature: 2x 0…325°C
Heating power: 0…450W
• Required for Operation
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase