Training Lab Equipments, Manufacturer, supplier and exporter of Mechanical Lab Equipments in Argentina, Bolivia, Brazil, Chile, Colombia, Costa Rica, Ecuador, El Salvador, Guatemala, Honduras, Mexico, Nicaragua, Panama, Paraguay, Peru, Dominican Republic, Uruguay.
Lab Tender Suppliers Africa and Lab Equipment Africa Kenya, Uganda, Sudan, Algeria, Morocco, Angola, Ghana, Mozambique, Madagascar, South Africa, Ivory Coast, Cameroon, Niger, Burkina Faso, Mayotte, Sao Tome, Seychelles, Zambia, Chad, Somalia, Senegal, Zimbabwe, Guinea, Rwanda, Benin, Burundi, Tunisia, South Sudan, Mali, Malawi, Nigeria, Ethiopia, Egypt, DR Congo, Tanzania, Togo, Sierra Leone, Libya, Congo, Central African Republic, Liberia, Mauritania, Eritrea, Gambia, Botswana, Namibia, Gabon, Lesotho, Guinea Bissau, Equatorial Guinea, Mauritius, Eswatini, Djibouti, Reunion, Comoros, Cape Verde, Western Sahara Ministerial Tender Board Lab Equipment, Ministry of School Education, Vocational Training Lab Tenders Suppliers India
Engineering Technical Training and School Lab Kits East Timor, Macao, Palestine, South Korea, Anguilla, India
School Science Laboratory Equipments Suppliers China Training Lab Equipments and Training Solutions - Astra Scientific is a leading manufacturer and supplier of best-quality Training Lab Equipments and Basic Science Laboratory Apparatus and Training Solutions. Astra Scientific offer wide range of educational training, skilling Training Lab Equipments and solutions for Science Lab Training Lab Equipments for Schools, Universities, Colleges, ITI, Polytechnic and Vocational Training Institutes. Astra Scientific is a leading basic science lab products and Training Lab Equipments TVET Education solution provider with a global footprint. Astra Scientific have a presence and export Training Lab Equipments to more than 75 countries across the world. Training Lab Equipments Manufacturer, Training Lab Equipments Suppliers, Training Lab Equipments in India, Training Lab Equipments Exporters, School Training Lab Equipments, Training Lab Equipments India, Educational Supply Training Lab Equipments, Training Lab Equipments Manufacturer in India
Lathe machine Height of Center(mm) 250 Width of Bed (mm) 325 Max Swing over bed (mm) 500 Max Swing over Slide (mm) 300 Max Swing in Gap 775 Spindle Bore (mm) 52 Spindle Nose 6TPI Spindle Speed 8 (R.P.M) 30 to 475 Cross Slide Travel (mm) 270 Top Slide 150 Lead Screw TPI 4TPI Tail Stock Sleeve MT-4 Power Required (H.P.) 3....
Product Code: ASAC09 - (Lathe machine)
Hydraulic Power Hack Saw Bed : Rigid casting with a wide through for collection of coolant, swarf & also houses the V - belts device, bed is single piece casting. Saw Frame : Rigid construction & runs is prismatic guide ensuring a square & parallel cut & this cut takes place on the backward pull stroke. The blade is hydraulically lifted out of contact with work place on the forward stroke to prevent wear of the blade. The Drive : Given to the machine through V - Pulleys with provision to adjust fully the tension of the V - Belts. The Shafts are fitted with taper and ball bearings which eliminate friction. Speed : Two speeds suitable for all metals. High speed for metals like mild steel, brass, copper etc. and low speed for cast iron Feed Saw : Controlled hydraulically by two levers provided at the dash - pot. One controls the rate of feed, while the other enables the bow slide to be raised or lowered and the motor gets switched off on completion of the cut. Vice : Rigid construction. The one jaw remains fixed while other can be adjusted according to the size of the material to be cut. Coolant : Tank is totally enclosed in the machine bade with a constant speed pump which continuously supplies coolant to the saw blade Electricals : Push button starter is fitted with an adjustable trip mechanism with stops the machine soon after the blade is clear form the work at extra cost. Standard Accessories : Mechanical Coolant Pump Motor Pulley Starter Plate Length Gauge Belts Guards Flexible Coolant pipe Extra Accessories : V - belts, Blade Hydraulic Oil Bar Stand Motor Stater Electrical Wiring Three Speed Gear Box....
Product Code: ASAEE5 - (Hydraulic Power Hack Saw)
Shaping Machine Specifications: (In mm unless specified otherwise) Working Stroke 450 Working Table 400 x 290 Max. Table Horizontal Traverse 500 Max. Table Vertical Traverse 300 Max. Tool Shank 32 x 16 Stroke/Minute (4-Speed) 17-75 Main Motor 1.5 kW....
Product Code: ASB19 - (Shaping Machine)
Universal Milling Machine • Sturdy construction • Easy to use • Corrosion resistant • Abrasion resistant • Dimensionally accurate • Efficient performance....
Product Code: ASEE4 - (Universal Milling Machine)
Radial Drilling Machine Max. Drilling Diameter - Steel38mmMax. Drilling Diameter - Iron50mmMax Tapping Capacity - SteelM30Max. Boring Capacity - Steel75mmSpindle Travel280mmSpindle TaperMT4Number of Spindle Speeds16Speed Range32 - 2500 rpm Number of Spindle Feeds8Range of Feeds 0.08-1mm/revColumn Diameter335mmMin. Distance Between Spindle axis and Column300mmMax. Distance Between Spindle axis and Column1000mmHorizontal Travel of Spindle Head1250mm. Dimensions 1760x800x2050mm....
Product Code: ASAA3 - (Radial Drilling Machine)
Chop Saw Machine Chop saw Quick release vice for fast clamping; 4-1/2" cutting capacity; Shaft lock for easy wheel change, Blade Diameter: 355mm; Rated Voltage: 240/110V; 50/60Hz; Rated Input Power: 1800W; Utilizes dry (a.k.a. cold) cut technology which will cut on average three times faster than an abrasive machine and costs 1-1/2 times less to operate. The saw produces little to no sparks when cutting and leaves a virtually burr-free finish. The base is a heavy-duty cast aluminum reinforced with a 1/4 inch steel plate. The vise and back fence is tool free. The horizontal D-handle provides optimum comfort whether the tool is on the ground or sitting on a bench.....
Product Code: ASAV77 - (Chop Saw Machine)
Vertical milling machine This heavy duty vertical milling machine handles conventional milling, compound-angle milling, drilling, jig boring and other milling applications! Features include a 2-HP motor, a gooseneck lamp to shed extra light when working on your piece and a heavy duty cast iron base and frame.....
Product Code: ASA55TU - (Vertical milling machine)
Bench grinders Grinder 12" 180 Grit, 3600 rpm; - Two 12" Platen (120 or 180 grit, variable speed The compact and Bench Grinder Machine for stationary grinding, deburring and finishing operation. Absolutely different with a standard bench grinder. Ideal for 200mm Out dia and width up to 50mm valgro deburring and finishing wheels.....
Product Code: AS3E25 - (Bench grinders)
CNC lathe machine Max swing dia over carriage 140mm; travel odf X axis 250mm; travel of Z –axis 250mm; dia of spindle bearing 80mm; spindle bore 52mm; motor power 5.5/7.5kW; Table size 690mm x265mm; tool shank size 20 x20mm; overall size LxWxH 1840 x 1600 x 1210. 2050kg....
Product Code: ASAC57UI - (CNC lathe machine)
Bench Drill Drilling capacity in steel 13 mm, drilling depth 60 mm , distance column- sindle200mm, speed 400-3000rpm....
Product Code: ASA890P - (Bench Drill)
Pillar Drilling machine Table approx 300x400mm, speed150- 3000rpm, distance column-spindle 250mm....
Product Code: ASATYP9 - (Pillar Drilling machine)
Multi-Former Bend width 1016mm; shearing thickness 1.6mm; bending thickness 2mm; bending angle 900; rolling thickness1.6mm min. rolling dia. 50mm.....
Product Code: ASAASD3 - (Multi-Former)
Arc Welding Machine IS-217A, IT512A,48KVA@5% DUTY CYCLE Three phase power supply, 220V/380/400/415V/440V, 50HZ Light weight/ Heavy duty cycle. Ingination/Welding current and arc force. Standard accessories – welding cable-5m+500; A holder welding cable - 5m+500A EARTH Clamp, option – remoter function and remoter unit; Dual digital display, current preset function; Easy operation, over hot and current, abs. phase protection....
Product Code: ASA2W 100B - (Arc Welding Machine)
Gas Tungsten Arc Welding (GTAWV Tungsten Inert Gas (TIG)welding Power supply 220-240V; 50-60HZ; Output: OCV - DCI 175-85V,Current Range: 5-160; - Cooling Forced Air; - Dimensions: WxLxH in 200x440x290 mm; Weight: 15Kg. With standard accessories.....
Product Code: ASAR43 - (Gas Tungsten Arc Welding (GTAWV Tungsten Inert Gas (TIG)welding)
Slip roll (sheet Metal) Max. Width1300mm; diameter of rolls 75mm, net weight 200kg....
Product Code: ASAWQ12 - (Slip roll (sheet Metal))
Gas metal arc welding (GMAW), /metal inert gas (MIG) welding / metal active gas (MAG) welding....
Product Code: ASAWQ12 - (Gas metal arc welding (GMAW), /metal inert gas (MIG) welding / metal active gas (MAG) welding)
Spot Welding Setup These single pulse battery spot welders are an affordable solution for businesses interested in welding batteries and packs. Capacitive discharge welders offer high peak currents with extremely fast pulse rise times (10's of µs). welding produces repeatable fusion welds independent of line voltage fluctuations and is capable of extremely fine energy adjustment.....
Product Code: ASART57 - (Spot Welding Setup)
AC-DC Welding Machine 250 This Ranger delivers XTra welding performance with 250 amps for AC or DC stick and wire welding. And, it is remote-ready for extended amperage control or AC TIG welding on aluminum with Lincoln’s optional TIG module. The GXT generates XTra power, up to 11,000 watts peak, for lights, grinders and high amperage equipment....
Product Code: ASART66 - (AC-DC Welding Machine 250)
DC Welding Machine 140 MMA DC hand electrode welderMain Features: 1. Adopt with advanced MOSFET/IGBT inverter technology, save energy, protect the environment, light and compact, portable, accord with EMC standard. 2. Current can be adjusted stepless, high efficiency. 3. Fan-cooled, automatic protection of over-voltage and over-current, thermostatic protection, moveable welding cable. 4. Strong welding permeability, less splash, good weld appearance, sound-proof. 5. Suitable for all kinds of basic and acid electrodes. 6. Be able to long-distance weld all kinds of material, such as stainless steel, steel, tungsten, titanium, nickel and other alloy material. 7. With complete accessories. 8. Carton box/BMC.....
Product Code: ASART55 - (DC Welding Machine 140)
Gas Welding/Cutting Set These welding & cutting equipment sets are ready to connect to most types of portable Oxy/Acetylene gas cylinders, with a wheeled trolley included, and are ideal for mobile maintenance and repair work, home workshops, and garage use.....
Product Code: ASART12 - (Gas Welding/Cutting Set)
Plasma Cutter CNC, Direct and indirect plasma arc machines, Max. Temperature 20,0000C; - Cutting Capacity SS/MS clean cut 6 mm; - Torch cooling Air, Plasma gas: Air; - Power:3 Phase 50 Hz With Neutral Volts! 1380 /415, Rated Input KVAT16, Transformer Cooling Air; Output: Current DC 30A, Max O.C.V. VoltsL!320; Air / Gas Flow in LPMin1200, Pressure in Bars 5; - Dimensions: L x W x H = 860 x 540 x 700, mm; Weight:70 kgs....
Product Code: ASACR44 - (Plasma Cutter)
Injection moulding machine Size: L= 2718 mm, W= 1903 mm, H= 2744mm; - Weight: 4,717 Kg; Screw: 30:1 (35 mm); - Shot Capacity: 90 g for HDPE and 75g for PVC; - Pre-form Clamp: 34.6 tons; Blow mold clamp: 6.0 tons; Shut height 2032 mm; Press stroke 101.6 mm; - Maximum die: L= 508 mm, W=393.7 mm; - Max. Swing 432 mm; Power 37 KW. PLASTIC INJECTION MOLDING MACHINE Unit FTN280 Series INJECTION UNIT A Screw Diameter mm 55 Screw L/D Ratio L/D 24 Shot Size (Theoretical) cm3 638 Injection Weight (PS) g 580 Injection Rate g/s 215 Plasticizing Capacity g/s 31.8 Injection Pressure MPa 214 Screw Speed rpm 0-185 CLAMPING UNIT Clamp Tonnage KN 2800....
Product Code: ASA221 - (Injection moulding machine)
Furnace For smelting both ferrous and non ferrous metals. Oil or coal fired 50kg molten metal capacity Universal precise laboratory electric furnace designed for materials heat treatment, ceramic and stoneware samples firing. The furnaces could be equipped with folding or side open door. Furnace can be used in laboratories, educational institutions, ceramic studios, and industrial laboratories. -T max. 1100ºC -Vacuumed ceramic fibre chamber - Heating elements are integraled around a chambrer - High quality thermoinsulation materials -Micro processor temperature controller -Excess temperature controller -Door interlock switch -Ceramic bottom plate -Short heating time -Hermetic closing door -Low power consumption -High precision level....
Product Code: ASA666 - (Furnace)
Ferrous and non-ferrous metal furnace....
Product Code: ASACU6 - (Ferrous and non-ferrous metal furnace)
Sand mould and core making equipment 1. Steady blowing air-pressure can be adjustable, mold cavity can be fully stuffed. 2. Heating plate offers heat sufficiently, the quality of the sand core can be ensured. 3. Adjustable loading mold plate, avoiding wrong molds and air leakage. 4. Steady push-out, reducing push-out damage rate. 5. Hommization press button design, convenient and easy operation. Max Weight of Sand Core 3.2 kg Max Mold Dimension 350*250*160 mm Heating Plate Dimension 350*200 mm Heating Power 6.5 kw Max Loose Core Stroke 125 mm Shooting-sand Head Stroke ≤30 mm Opening Stroke ≤200 mm Shooting-sand Air-pressure 6-8 bar....
Product Code: ASACU9 - (Sand mould and core making equipment)
Universal Heat treatment Setup. Type: KIA-60AB; Work power: 3><380V(415V,440V)50-60HZ; The range of operating voltage 340V- 420V(370-450)V AC; Output power 60 KW; - Fluctuating frequency 50-200KHZ; Output current; 400-1800A; Timing (Heat time .e Retain time Cooltime) 1-99S. - The flow rate of cooling water 0 .08-0 .16 Mpa 7.6L/Min; Water temperature protection point 40°C ; Duty cycle 100% (40degree room temperature); - Weight Mainparts:38Kg extension:33kg; Size Main parts: 640*280*550; Extension: 510*260*410; - Applications: Drill tip heat shaping; Heat treatment Quenching; Forging Melting; Soldering and brazing....
Product Code: ASAC31X - (Universal Heat treatment Setup.)
Metallurgical Microscope magnification : 100-500X, Eyepiece: 10X, 12.5X, Objective: 10X, 40X, Photo Objective: 15X, Slideway: X-direction 15mm, Y-direction12mm, Camera: 35mm, Illuminator:Illuminator: 6V 15w Power supply:, 230V 50/60Hz....
Product Code: SM 500 - (Metallurgical Microscope)
Universal Testing Machine Universal Material Tester, 20 Kn, Max. test force: 20kN, Max. stroke: 45 mm, Space available for specimens: 165x65mm, Tensile specimens: B6x30mm, DIN 50125, Hardness specimens: l x w x h 30x30x10mm, Dynamometer: measuring range: 0-20kN, graduations: 0.5kN, Dial gauge: measuring range: 0 - 10mm, graduations: 0.01mm.....
Product Code: WP 300 - (Universal Testing Machine)
Universal Impact Testing Machine Load : 250 - 3000KGF - Drive : Electrical ,415V - Max Test Height: 410mm - Depth of spindle below bade:180mm - Nett Weight: 450KG - Height: 1127MM....
Product Code: ASAVB6 - (Universal Impact Testing Machine)
Creep Test Machine Creep Machine, SIZE: 570 mm x 220 mm, Operating temperature range: +5°C to +40°C, Sound Levels: Less than 70 dB, SPECIMENS: 10 x CP1010 Lead, 10 x CP1020 Polypropylene. Test weights : 3 x 500 g, 2 x 200 g, 1 x 100 versatile Data Acquisition System (VDAS-B), Connectivity Kit (SM1006CK) for connection to VDAS®....
Product Code: SM1006 - (Creep Test Machine)
Non destructive testing equipment - Ultrasonic Pulse Velocity System For Finding Voids and Cracks and Determining Other Material Properties, complete V-Meter MK IV™ System including Basic System, Software for PC uploads and Transducers - FOERSTER INSTRUMENTS INC, Magnatest® D 3.623 – 1676318, Instrument Technology: magnetic, - Measurement Capability: Alloy Sorting / Content; Heat Treatment; Tensile / Yield, Strength; Grain Structure, Case Depth....
Product Code: ASETE9 - (Non destructive testing equipment)
Fatigue Test Machine Fatigue Testing Machine, Motor: speed: 2800rpm, output: 0.37Kw. Load: 0 -300N, Load cycle counter: electronic, 8-digit digital display, can be switched to display speed, Test bars: tempering steel Ck 35, 230V , ~50Hz....
Product Code: WP 1401 - (Fatigue Test Machine)
Torsion Testing Machine Max. test moment: 200Nm, Test speeds: 50, 100, 200, 500rpm, Specimen length: max. 300mm, Specimen holder: hex socket 19mm AF, Strain gauge torque measurement: 0 - 199.9Nm, Absolute angle encoder, optoelectronic: measuring range: 0 - 3200°, resolution: 0.1°, PC interface: RS232, Frequency converter with 4 fixed speeds, Motor output: 0.12kW....
Product Code: WPM 510 - (Torsion Testing Machine)
Eddy current NDT equipment - Operates with encircling, sector, or rotary test Sensors - Differential and/or Absolute mode operation - Up to 8 test channels; Broad test frequency selection – l KHz to 5MHz - Store & recall setups; print & transfer data - Inspect tube or bar, magnetic or non-magnetic - Weight: (104.54 kg.) for cabinet. - Air conditioner (additional) (21.8 kg) - Power Requirement 240 V, ac, 50/60 Hz, single phase, 5 amps (not including the air conditioner).....
Product Code: ASAEE399 - (Eddy current NDT equipment)
Pyrometers Short wavelength Infrared Radiation Pyrometer, resolution 0.01 °C, temperature ranges 200 °C to 3000 °C....
Product Code: CT18 SERIES - (Pyrometers)
Ackermann Steering Demonstrator Table or wall mounted unit King pin spacing 465mm Steering lock angle graduations adjustable track rod Lxwxh 630x280x50mm....
Product Code: KI 1601 - (Ackermann Steering Demonstrator)
Whit worth Quick Return Apparatus Drive crank radius: 46mm, Slider radius: 55mm, Axle offset drive slider: 30mm, Connecting rod length: 145mm....
Product Code: KI 140 - (Whit worth Quick Return Apparatus)
Universal Governor Apparatus Governor Mechanism: Four different types of governor mechanism with spring and weights 1. Watt Governor 2. Porter Governor 3. Hartnell Governor 4. Proell Governor Variable speed Motor HP,Digital RPM Indicator with Proximity sensor....
Product Code: TY67 - (Universal Governor Apparatus)
Coriolli's Component of Acceleration Apparatus - Main Tank Fabricated out of Stainless Steel - Rotating Arms 9mm/6mm orifice diameter, Length 300 mm. - Rotameter : 250 to 2500 LPH - Electric Motor: Swinging field type, Variable speed. - Pump :FHP - Control Panel Comprises of RPM measurement RPM Indicator with Proximity sensor. Speed Control Unit, Standard make On/Off Switch, Mains Indicator....
Product Code: ASAEDF45 - (Coriolli's Component of Acceleration Apparatus)
Cam Analysis Apparatus Three-phase asynchronous motor with frequency converter, power: 250W, speed: 6 - 670min-1 , Cams: 15mm lift, opening angle: 140°, Spring rigidity: hard: 5026N/m, medium: 2601N/m, soft: 613N/m. Masses: additional weight: 200g, tappet: 530g, flat tappet: 93g, roller: 20g, Plotter: synchronous belt drive, Optical speed sensor....
Product Code: GL 112 - (Cam Analysis Apparatus)
Universal Vibration Machine - Dimensions: 1120 x 960 x 1830mm; Nett weight: 280kg - Servomotor controlled by precision speed control unit - A steel beam nominally 762 x 25.4 x 12.7mm - Space required: 3m x 3m - Single phase earthed AC supply 240V; 50Hz is required for the speed control unit for use with the exciter motor.....
Product Code: ASDGL11 - (Universal Vibration Machine)
Journal Bearing Apparatus A Mounting Board, an assembly with different bearings to compare the resistance to turning due to friction of different materials The apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a FHP Motor. The bearing is freely supported on the shaft and sealed at the motor end. The speed of the motor is controlled accurately by the speed control unit and it can be made run in both directions. Twelve equal-spaced pressure taping around the circumference and four along the axis are provided and are connected to manometer by PU Tubing so that the pressure head of oil in all tubes can be observed at a time. The bearing can be loaded by attaching weights to the arm supported beneath it. o Journal Diameter 50 mm o Bearing Diameter 55 mm o Weights 4 adjustable weights. o Motor Variable speed FHP Motor o Control Panel For speed control of motor.....
Product Code: ASFGH6 - (Journal Bearing Apparatus)
Michel Tilting Pad Bearing Apparatus Belt speed 0-750 mm/s Belt length : 1250 mm pad tilt range 0.5 - 2.5mm manometer gauge numbers 13....
Product Code: ASAE125 - (Michel Tilting Pad Bearing Apparatus)
Holding Torque Apparatus Internal Type Epicycles Gear Train A Compact gear train (industrial) Motor Variable speed DC Motor, 1 HP. Power Supply 220 V AC, Single Phase. Speed Control Unit Thyristor controlled DC Drive for varying the speed of DC motor. Rope brake arrangement to measure output torque and holding torque. RPM Measurement Digital RPM Indicator with proximity switch....
Product Code: ASADF5 - (Holding Torque Apparatus)
Slip & Creep in a Flat Belt Apparatus A mounting board, weights, spring balances and a belt drive with two pulleys for open and crossed belt drives Dimensions: 570 mm x 430 mm x 220 mm Nett weight: 7.5 kg Approximate packed volume and weight: 0.1 m3; 15 kg Temperature: Displayed by laboratory-standard thermometer or thermocouple (SM1000CK) and VDAS® Creep: Measured by digital indicator, with output for VDAS® Specimens (supplied): 10 x CP1010 Lead 10 x CP1020 Polypropylene....
Product Code: ASAC0966 - (Slip & Creep in a Flat Belt Apparatus)
Crank and Connecting Rod Apparatus A Mounting Board with one mechanism and parts to shows how a crank turns straight line movement into circular movement, and how a toggle mechanism turns circular movement into straight line movement....
Product Code: ASAC12509 - (Crank and Connecting Rod Apparatus)
Hooke's Coupling Apparatus A Mounting Board with one mechanism that shows how a Universal Coupling works ORDER SPECIFICATION-041.15000 Hooke's Coupling Apparatus [1] Benchtop experiment on gimbal error and its avoidance on articulated joints [2] Hooke's coupling, standard industrial parts [3] Scales made of transparent plastic [4] Ball bearing mounted shaft ends [5] Solid, painted base plate [6] lxwxh 360x280x185mm Shaft diameter: D=16mm Scale disc diameter: D=100mm l x w x h : 360 x 280 x 185 mm Weight : approx. 7 kg....
Product Code: KI 150 - (Hooke's Coupling Apparatus)
Gear Trains Apparatus Steel gears - No. of teeth: 15, 16, 20 - modulus: 20mm Plastic belt pulleys - diameter: D=300mm, D=320mm, D=400mm - drive belt: O-ring 5x650mm....
Product Code: ASAG4 - (Gear Trains Apparatus)
Gear Trains Model Plastic gears - modulus: 1mm - number of teeth: 40, 60, 80, 100 Base plate and carrier rail made of metal Spur gear trains 1 and 2 stage, planet gear trains....
Product Code: ASAG5 - (Gear Trains Model)
Spur Gear Lifting Apparatus 4 gear wheels - 2x D=126mm, 84 teeth - 2x D=42mm, 28 teeth - modulus: m=2mm Driving pulley radius: 35mm Set of weights - 2x 1N suspended - 2x 0,25N - 1x 0,5N - 2x 1N - 2x 2N - 2x 2,5N Base plate - lxwxh: 350x150x10....
Product Code: ASAGGH7 - (Spur Gear Lifting Apparatus)
Winch Drum diameters - driving: 220mm - driven: 110mm Gear wheels - small: 12 teeth - large: 60 teeth - module: 2mm each Total transmission ratio: 10 Sets of weights - drum: 1x50N, 2x20N, 1x10N - driving wheel: 1x5N, 4x2N, 1x1N, 1x0,5N, 1x0,5N (guide rod) Dimensions and Weight l x w x h: 265 x 200 x 250 mm Weight: ca. 22 kg....
Product Code: 125 WINCH - (Winch)
Centrifugal Force Apparatus Specification [1] Measurement of centrifugal force on rotating masses [2] 5 different path radii [3] 3 different rotating masses [4] Force measuring range 0...25N [5] Rotational speed continuously regulated [6] Digital display of force and rotational speed [7] lxwxh 420x400x270mm Technical Data Path radii: 25mm, 50mm, 75mm, 100mm, 125mm Rotating masses: 54g, 79g, 105g Speed range: 0...500rpm Load - measuring range: 0...25N - resolution: 0.1N Dimensions and Weight l x w x h : 420 x 400 x 270 mm Weight : approx. 23 kg Connections 230V, 50Hz, 1 phase Scope of Delivery 1 complete measuring unit....
Product Code: TM 600 - (Centrifugal Force Apparatus)
Gyroscope Standard: Brass wheel is 7.5cm diameter and 3cm at its rim carefully balanced and all the three pairs of pivots are adjustable - Complete fitted on metal base. - Bench space: 1.2m x 0.6m, speed control unit: digital tachometer and stop watch. - Dimensions: 650mm x 510mm x 340mm, Nett weight:22Kg....
Product Code: TM 630 - (Gyroscope)
Inertia in Rotational Motion Apparatus Rotating rod: 550mm long, D=10mm Weights: 100g, 200g, 400g Solid cylinder - diameter: D=120mm - mass: 900g Hollow cylinder - outer diameter: D=120mm - inner diameter: d=110mm - mass: 0.9kg Weight for the drive: 1N....
Product Code: TM 610 - (Inertia in Rotational Motion Apparatus)
Inclined Plane - A Mounting Board, an adjustable plane assembly, Consisting of a wooden plane 90x18cm having adjustment for setting the required angle precisely - Complete with frictionless pulley, linear and circular scale pan a wheeled trolley, a set of slides having different bottom, and set of weights - One weight box (each of 5 gm, 10 gm, 2- 20 gm, 2-50gm, 2-100 gm weight), Boxes each weighing 300 gm.....
Product Code: TM 225 - (Inclined Plane)
Flywheel Apparatus [1] Student experiment on the moment of mass inertia of a flywheel [2] Steel flywheel [3] Steel shaft used as drive pulley [4] Set of weights [5] Ball bearing mounted shaft [6] Anodised aluminium base plate Technical Data Flywheel - D=300mm - height: 40mm - mass: 22.2kg - mass moment of inertia: 0.25kgm² Pulley D=22mm Set of weights....
Product Code: TM 612 - (Flywheel Apparatus)
Compound Pendulum Apparatus [1] Experiments on the oscillation of pendulums, comparison of physical and mathematical pendulums [2] Rod pendulum (physical pendulum) made of metal, mounted on sliding knife edge bearing [3] Thread pendulum (mathematical) [4] Additional weight for rod pendulum, can be moved [5] Base plate for wall mounting Technical Data Thread pendulum - length: up to 2000mm - nylon cord as thread - mass: D=50mm, 0.52kg Rod pendulum - length: 1000mm - D=8mm....
Product Code: TM 161 - (Compound Pendulum Apparatus)
Torsional Vibration Apparatus Specification [1] Student experiment on torsional vibration [2] Torsion wires, made of aluminium [3] Mass disc made of galvanised steel [4] Mass ring made of galvanised steel [5] Strong chuck for fitting the wires [6] Wall mounting plate made of anodised aluminium Technical Data Torsion wires - length: 1100mm - diameter: 2mm, 3mm, 4mm, 5mm and 6mm Mass disc - diameter: 160mm Mass ring - outer diameter: 160mm - inner diameter: 100mm Dimensions and Weight l x w x h: 200 x 150 x 270 mm Weight: approx. 11 kg Scope of Delivery....
Product Code: TM 163 - (Torsional Vibration Apparatus)
Vibration of Spiral Spring Apparatus Spiral spring - stiffness: c=238Nmm - cross-section: 10x1mm - effective length: approx. 800mm - inside radius: 10mm - outside radius: 50mm Weights made of stainless steel - mass: 0.5kg - diameter: 50mm Levers made of stainless steel - diameter: 8mm - length: 154mm - arm radius of the rotating mass: 36...150mm Angle measuring scale - 0...360° - resolution: 1° Base plate - w x h: 200x250mm....
Product Code: ASgd409 - (Vibration of Spiral Spring Apparatus)
Free and Forced Vibration Apparatus [1] Basics of mechanical vibration, natural damped and forced vibrations [2] Bar-type oscillator [3] Three helical springs [4] Unbalance exciter with DC motor, 0.77kg [5] Displacement exciter with DC motor [6] Electronic control unit with digital display, exciter frequency adjustable [7] Oil-filled damper [8] Electrically driven drum recorder [9] Amplitude meter with electric contact for triggering equipment [10] Storage system to house the components Technical Data Bar-type oscillator: l x w x h: 700x25x12mm, 1.6kg Helical springs - 0.75N/mm - 1.5N/mm - 3.0N/mm Exciter frequency: 0...50Hz, electronically controlled Unbalance of the unbalance exciter: 0...1000mmg Stroke of the displacement exciter: 20mm Damper constant: 5...15Ns/m, oil-filled Mechanical chart recorder - feed: 20mm/s paper width: 100mm Dimensions and Weight l x w x h: 1000x420x900mm Frame opening w x h: 870x650mm Weight: approx. 52kg Connections 230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase (exciter control unit) Scope of Delivery 1 frame 1 bar-type oscillator 3 helical springs 1 unbalance exciter 1 displacement exciter 1 exciter control unit 1 damper 1 amplitude meter 1 drum recorder 1 storage system 1 manual....
Product Code: TM 155 - (Free and Forced Vibration Apparatus)
Universal Vibration System Specification 1] Instructional and experimental vibration system, experiments on damping, resonance, two-weight system and vibration absorption [2] 6 pendulum oscillators, 2 bar-type oscillators, 1 spring-mass oscillator [3] Electrical imbalance exciter [4] Electronic exciter control unit with digital frequency display and TTL output for triggering external units [5] Adjustable absorber with leaf spring [6] Oil-filled damper Technical Data Bar, rigid: l x w x h: 700x25x12mm, 1.6kg Bar, flexible: l x w x h: 25x4x700mm, 0.6kg Tension / compression springs - 0.75N/mm - 1.5N/mm - 3.0N/mm Imbalance exciter - 0...50Hz - 100cmg Oil-filled damper: 5...15Ns/m - leaf spring, wxh: 20x1.5mm - total weight: approx. 1.1kg - adjustable 5...50Hz Groove width of frame: 10mm Drum recorder: 20mm/s, width 100mm Polar diagram recorder: D=100mm Dimensions and Weight l x w x h: 1000 x 800 x 1800 mm Opening in frame w x h: 870 x 650 mm Weight: approx. 160 kg Connections 230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase (control unit) Scope of Delivery 1 frame and laboratory trolley 6 pendulums 2 bars 3 springs 1 exciter control unit 1 imbalance exciter 1 damper 2 recording devices 1 experiment instructions....
Product Code: TM 150 - (Universal Vibration System)
Static and Dynamic Balancing Equipment Guarded and interlocked for safety. - Power Supply: 12 volt d.c. 10 ampere output from main - Main shaft bearing - Double row, self-aligning ball bearing. - Load balls - 1 set precision made steel balls....
Product Code: ASATRR44 - (Static and Dynamic Balancing Equipment)
Critical Speed Investigation Apparatus Portable unit investigating the vibration behaviour of machine rotors....
Product Code: ASACSR343 - (Critical Speed Investigation Apparatus)
Coupling Kit A Mounting Board with one mechanism that shows how a Universal Coupling works.....
Product Code: ASAKK1 - (Coupling Kit)
Pulse analyser system Bruel & Kjaerpulse analyser, Type Number 3160-A042; 4 input channel, 2 input channel, frequency range 0hz -51.2 kHz; Add battery Module and Software....
Product Code: ASACC4 - (Pulse analyser system)
Tribology Trainer Basic Module 1] Basic module for experiments on tribological systems [2] Base frame made of anodised aluminium profile [3] Modular layout as table unit [4] Rapid assembly due to special fasteners [5] Swivelling drive consisting of DC motor and worm drive 15:1 [6] Operating speed: 0...200rpm, continuous, electronically controlled, 8-digit speed display [7] Force measurement using strain gauges, 0...50N, 3½-digit digital display [8] Incremental encoder: number of pulses 6/360° [9] Control housing l x w x h 370x270x190mm [10] l x w x h 500x450x200mm Technical Data DC motor - supply: 24V - nominal speed: 3000rpm - torque: 18.5Nm Worm drive: ratio 15:1 Operating speed: 0 ... 200rpm, electronically controlled Speed display, 8-digit....
Product Code: 156 - (Tribology Trainer Basic Module)
Moment Of Inertia setup Inertia in Rotational Motion Apparatus Technical Data Rotating rod: 550mm long, D=10mm Weights: 100g, 200g, 400g Solid cylinder - diameter: D=120mm - mass: 900g Hollow cylinder - outer diameter: D=120mm - inner diameter: d=110mm Weight for the drive: 1N....
Product Code: TM 610 - (Moment Of Inertia setup)
Fletcher Trolley Apparatus FLETCHER TROLLEY APPARATUS, two trolley system ¨ Weights and consumables included ¨ Swinging arm available for angular momentum experiments (P2073) ¨ Accurate and repeatable results P2072 180 cm long x 15 cm wide x 15 cm high Cussons Technology Ltd....
Product Code: P2072 - (Fletcher Trolley Apparatus)
Atwood Machine Apparatus. • Atwood’s machine : 1 m table rod, Pulley: 15.2 cm. Diam. X 1 cm. Thick easily demountable, with ball-bearing hub and spokes for the Digital Photogate to read • Mass holders: 100 g each with four slotted riders • Mounting: Cast aluminium wall bracket....
Product Code: PASCO 09 - (Atwood Machine Apparatus.)
Bell Crank Lever Apparatus. Lever horizontal arm 75cm, vertical arm 20cm, spring balance 10kg capacity, adjustable; slotted cast iron weights, 0.5kg. With one hanger of 0.5 kg and steel mounting.....
Product Code: AA15 - (Bell Crank Lever Apparatus.)
Strain measurement training kit Electronic measurement of mechanical variables1 * Test bars for tension, bending and torsion1 * Universal 1-channel measurement amplifier....
Product Code: ASER45Y - (Strain measurement training kit)
Constant stress creep machine....
Product Code: ASKLV09 - (Constant stress creep machine)
Sound level meter Parameters SPL, LMax, LMin, LPk(Peak), LEQ/LAVG, Elapsed Time, Range: 110 dBA total dynamic measurement range, Overall range 30 – 140 dBA (single range) ,Max Peak Level: 143 dBA (sampled peak), Status Indicators: Run, Stop, Battery Status, OL (Overload), UR (Under-Range), Run-Time, Locked, Locked Status....
Product Code: SE-401 - (Sound level meter)
Extenso meters General purpose extensometers for axial tensile, compression, and cyclic testing Gauge lengths from 0.5 to 2 inches (10 to 50 mm) , measuring ranges from 5% to 100% of the gauge length....
Product Code: ASA749 - (Extenso meters)
Octave band filter sets Range: 12.5 Hz to 20 kHz in one-third octave bands, Auto mode to step sequentially through each band.....
Product Code: ASAC09 - (Octave band filter sets)
Internal combustion test cells Set Portable engine test cell....
Product Code: ASHY779 - (Internal combustion test cells)
Fundamental Temperature Measurement instrument For experimental introduction to temperature measurement (eight different temperature measurement methods): methods, areas of application, characteristics....
Product Code: ASACGT5 - (Fundamental Temperature Measurement instrument)
Thermal Radiation Unit / PC For Thermal and visible radiation with PC data acquisition....
Product Code: ASACBNM7 - (Thermal Radiation Unit / PC)
Change of State of Gases unit Isothermic and isochoric change of state of air....
Product Code: ASACCCT5 - (Change of State of Gases unit)
Pressure Measurement instrument For measurement of pressure above and below atmosphere....
Product Code: ASATP88 - (Pressure Measurement instrument)
Advanced Temperature Measurement Unit For static and dynamic measurement with different instruments....
Product Code: ASATP44 - (Advanced Temperature Measurement Unit)
Boyle's Law Demonstration / PC COMPRESSOR / VACUUM PUMP: power output: 60W, delivery side: 2bar, intake side: 213mbar, TEMPERATURE MEASURING RANGE: vessel 1: 0 - 80°C, vessel 2: 0 - 80°C, PRESSURE MEASURING RANGE : vessel 1: 0 - 4bar absolute, vessel 2: 0 - 2bar absolute, VOLUME MEASURING RANGE: vessel 1: 0 - 3L. 1 LabVIEW software CD + USB cable....
Product Code: WL 102 - (Boyle's Law Demonstration / PC)
Condensation Unit HEATER: power: 3kW, adjustable, CONDENSER PIPES: 1x copper, sand blasted, 1x copper, gold plated, surface area: 36.18cm². WATER JET PUMP: required water pressure: 0.5bar, flow rate: 4...12L/min, final pressure: 16mbar. PROCESS TANK: pressure: 2bar absolute. MEASURING RANGES: pressure: 0 - 4bar absolute, flow rate: 2x 0,2 - 6L/min. 230V, 50/60Hz, 1 phase, 1 LabVIEW software CD + USB cable.....
Product Code: WL230 - (Condensation Unit)
Flow Boiling Demonstration....
Product Code: H410 - (Flow Boiling Demonstration)
Natural Convection and Radiation Apparatus Heater: 20W, Radiation surfaces: heater sleeve: 55cm², vacuum vessel: inner sleeve: 0,2m², Vacuum pump: power: 370W, nominal suction capacity: 6m³/h, Pressure range: 10-5- 2bar absolute, Measuring ranges: pressure below atmospheric: 0, - 1000Pa, pressure:1 -1.5bar, temperature: 0 - 200°C, power: 0 - 20W....
Product Code: AC09 - (Natural Convection and Radiation Apparatus)
Marcet Boiler SOLTEQ MODEL: Pressure Vessel: 3 litre capacity made of stainless steel, Pressure gauge:0 to 20 bar (Bourdon type), Thermometer: Glass, 0 to 200 oC, Transducers: Temperature and pressure, Operating Pressure: Max. 15 bar, Heater: 2 kW, immersion type. DIGITAL INSTRUMENTATIONS: 2 unit of digital indicator, 1 unit of pressure transmitter, SOLDAS DATA ACQUISITION SYSTEM: A PC with latest Pentium Processor, An electronic signal conditioning system, Standalone data acquisition modules, windows software for data logging, signal analysis, display tabulation and graphing.....
Product Code: HE 169 - (Marcet Boiler)
Heat Conduction Trainer Specification 1] Trainer to determinate the steady state and non-steady state thermal conductivities [2] Water-filled heat source and heat sink [3] Raised tank with overflow to generate a constant initial pressure [4] Temperature and flow rate measurement for cooling water [5] Electric heater with PID controller [6] Digital displays: heating capacity, temperatures [7] LabVIEW software for data acquisition via USB under Windows XP or Windows Vista Technical Data Heater - power: 800W - temperature: 20...80°C Specimen - Cu, Al, brass; Dxl: 40x450mm - steel, Dxl: 40x300mm - VA, Dxl: 40x300mm Heating tank: 5L Cooling tank: 0.5L Raised tank: approx. 6L Flow meter: 15...230cm³/min 14 temperature sensors - 12x along the specimen - 2x in cooling water circuit Measuring ranges - temperature: 0...200°C - power: 0...1000W Dimensions and Weight l x w x h: 1000 x 700 x 1745 mm Weight: approx. 96 kg Connections 230V, 50/60Hz, 1 phase or 120V, 60Hz, 1 phase or 120V, CSA, 1 phase Cold water supply 3bar, 150L/h....
Product Code: WL 900 - (Heat Conduction Trainer)
Solar Module Measurements Solar Module Measurements Technical Data Module design: - number of cells 36 - cell material: monocrystalline silicon - module area: 0,64m² Typical module parameters under STC (Standard Test Conditions) - max. output: 85W - short-circuit current: approx. 5,3A - open-circuit voltage: approx. 22V Slide resistor: 0...10 Ohm Two power resistors: 22 Ohm / 50W Measuring ranges - temperature: 0…100°C - voltage: 0...200V - current: 0...20A - illuminance: 0...3kW/m² - tilt: 0...90° Dimensions and Weight LxWxH: 1410x795x1490mm Weight: approx. 65kg Connections 230V, 50/60Hz, 1 phase or 120V, 60Hz, 1 phase Scope of Delivery 1 trainer 1 slide resistor 1 measuring unit 1 set of cables 1 inclinometer 1 set of instructional material....
Product Code: ET 250 - (Solar Module Measurements)
Solar Cell Measurements System Specification [1] Trainer for solar cell measurements [2] Four monocrystalline silicon solar cells [3] Lighting unit with adjustable illuminance [4] Backing for solar cells with Peltier module for regulating temperature [5] Patch panel with bypass diodes and adjustable load resistance for selectable types of connection with individual cells [6] Function for automated measuring of characteristic curves [7] Reference cell as illuminance sensor [8] LabVIEW software with operating status display, tutorial feature and data acquisition via USB, running under Windows XP or Windows Vista Technical Data Cell type: monocrystalline Cell size: 125x125mm Typical characteristics of a cell: - fill factor: 76% - max. output: 2,45W - current at max. output: approx. 4,8A - voltage at max. output: approx. 0,5V - short-circuit current: approx. 5,4A - open-circuit voltage: approx. 0,6V Peltier module: 15°C .. 60°C Lighting unit: 16x 35W Dimensions and Weight LxWxH: 1610x800x1480mm Weight: approx. 130kg Connections 230V 50/60Hz Scope of Delivery 1 trainer 1 cable set 1 LabVIEW software CD + USB cable 1 set of instructional material....
Product Code: ASAGUT876 - (Solar Cell Measurements System)
Cooling Column, Cooling Column, Type 2 Specification [1] Additional cooling column for the wet cooling tower WL 320 [2] Cooling column made of transparent plastic [3] Wet deck surface made of plastic [4] Connections to measure the pressure loss with WL 320 Technical Data Specific surface of the wet deck surface: 77m²/m³ Cross-section: 150x150mm Dimensions and Weight l x w x h: 210 x 210 x 630 mm Weight: approx. 5 kg Scope of Delivery 1 cooling column type 2....
Product Code: WL 320.01 - (Cooling Column,)
Gas and Diesel engine training module Capacities: 1500cc, 3000cc and 5000cc; Each diesel engine to with a turbo charger....
Product Code: AGNRT 457 - (Gas and Diesel engine training module)
Emission Testing Equipment Automobile Exhaust Gas Analyser, The main technical parameters: CO: 0~10.0 10-2(%),CO2:0~20.0: 10-2(%), HC: 0~10000 10-6(ppm), O2: 0~25.0 10-2(%), oil temperature:18～150ºC....
Product Code: SW-4Q - (Emission Testing Equipment)
Diesel Phasing & Calibration Machine Common/Standard Type Test Bench, Adjustable rotation speed range: 0~4000 RPM, Test cylinders: 12, Rotation speed presetting: 10 kinds, DC. Supply: 12/24V, Feeding pump motor: 1.1kw, Series of graduate glass: 45cc, 150cc. The 260cc, Volume of oil tank: 60L, 3-phase power supply: 380v/50hz.....
Product Code: 12PSDW - (Diesel Phasing & Calibration Machine)
Common rail injector tester 1.High pressure 0-1800bar 2. Check the injector starting pressure 3.Assessment of the injector spray fog quality 4. Inspeciton of the injector spray oil range 5.Check of the injector seal and angel 6.Check of the injector oil flow 7.The machine has fog dissipation convulsion device to improve the work condition. 8.It has the two garde filter to ensure the cleanliness of test. 9.The parameter of common rail injector ( fuel spray counts, frquency, pulse width, pressure etc..) can be set willfully. 10. it also can clean the common rail injector by Ultrasonic Cleaning Instrument.....
Product Code: CRT-1001I - (Common rail injector tester)
Wind Generator Specification [1] Experimental section for ET 220 for converting kinetic wind energy into electrical energy [2] Movable wind generator that can be set up outside [3] Four base supports for stabilisation [4] Stand-alone operation with connection to ET 220 [5] Generator for converting the kinetic energy into electrical energy [6] Accumulator for storing the electrical energy [7] Measurement of wind velocity [8] Measurement of the rotational speed of the rotor Technical Data Rotor - diameter: 1200mm - hub height above ground level: approx. 5000mm Generator - max. power: 350W - voltage: 12VDC - max. charging current: 30A Rechargeable battery....
Product Code: ASA ET 220 - (Wind Generator)
Autoboss V-30 advanced Automotive scanner CPU: SAMSUNG ARM 2410A, 200MHz, FLASH Card: SD Card, 1GB RAM: 64M, Power Supply: 8-12V (DC) 110-250V 50Hz (AC), Operation System: Window CE....
Product Code: ARM 2410A - (Autoboss V-30 advanced Automotive scanner)
Hydraulic press Maximum pressing force 75.000 kN. Clearance between columns 2.450 mm. Max plunger stroke 180 mm....
Product Code: ASA 75.000 kN - (Hydraulic press)
Gas turbine Trainer Turbojet Trainer (GT100) Uses industrial parts, powered by kerosene for realistic tests and results Fully interlocked starting procedure and automatic shut-down Automatic data acquisition (ADA) included (supplied with software) Supplied with ‘Gas Turbine Theory’ textbook Full schematic coloured instrumentation panel diagram shows students what each part does....
Product Code: ASA GT100 - (Gas turbine Trainer)
Cylinder Head re-facer AZ MACHINE TOOLS, SM10G-M Surface Grinding and Milling machine, WORKING CAPACITY: Max. Automatic table traverse : 1030 mm, Vertical wheel head traverse: 370 mm, Max. Grinding width: 340 mm, Max. Milling width with cutting tool: 340 mm, Grinding wheel rotation speed : 700-1400 RPM,....
Product Code: ASA SM10G - (Cylinder Head re-facer)
Pneumatic spanner set Adjustable torque, Max. torque: 230FT-LB Free speed: 7000rpm....
Product Code: 230FT-LB - (Pneumatic spanner set)
Bearing puller set 3 Piece Three-Jaw Puller Set (3", 4", 6"), Reversible jaws for inside and outside pulls, Forged alloy steel with rust-resistant chrome finish....
Product Code: 30FT-LB - (Bearing puller set)
Heavy duty coil spring compressor 2 Piece Set. All-steel construction, Diameter 19mm. Length 250mm.....
Product Code: ASA 20FT-LB - (Heavy duty coil spring compressor)
Educational and Training Software DVDs for ATA 100 Systems Aircraft training or equivalent....
Product Code: AEE 2 - (Educational and Training Software)
Spirit Level Minimum, 0.5mm bubble movement for a 0.1° (6’) change in angle.....
Product Code: AEE 3 - (Spirit Level)
Cable Tensiometer The Cable Tensiometer is calibrated for use on standard, multiple-strand, nonjacketed, aircraft cable, made of stainless steel or carbon steel with zinc or tin over zinc coating (MIL-DTL-83420 Specification, type I, comp. A and comp. B and Boeing BMS 7-265) of 7 x 7 stranding in diameters of 1/16 and 3/32 inch, and 7 x 19 stranding for 1/8, 5/32, 3/16, 7/32, and 1/4 inch. One analogue the other digital.....
Product Code: AEE 4 - (Cable Tensiometer)
Adjustable Spirit level Minimum 0.5mm bubble movement for a 0.1° (6’) change in angle.....
Product Code: AEE 5 - (Adjustable Spirit level)
Cathode Ray Oscilloscope • Wide spectral range up to 3.5 THz (116 cm-1) • Excellent spectral resolution better than 5 GHz (0.17 cm-1) • High power S/N ratio >106:1 at 0.4 THz • Real-time data acquisition up to 10 spectra/s • “No bearing” design of fast delay line – virtually unlimited lifetime • Transmission and reflection modes • High spatial resolution THz imaging • Complete PC control....
Product Code: AEE 6 - (Cathode Ray Oscilloscope)
Regulated power supply 5v dc Triple Output voltages 0-30v, 5v ,12v Output Current 2.5A 220 v Input....
Product Code: AEE 7 - (Regulated power supply 5v dc)
MIL STD 1553b setup with remote terminal Digital Time Division Command/Response Multiplexed Data Bus. The 1553b databus with a dual-redundancy, bi-directional, Manchester II encoded databus with a high bit error reliability.the bus respond to controller commands.....
Product Code: AEE 8 - (MIL STD 1553b setup with remote terminal)
Digital to Analogue Converter Four isolated 16-bit outputs • 100-kHz/channel update rate • 480 Ksamples/channel max buffer • ±1, ±2, ±5, and ±10 VFS programmable unipolar and bipolar output ranges....
Product Code: AEE 9 - (Digital to Analogue Converter)
16 Channel Analogue to Digital Converter Must provide 16-bit A/D conversion at up to 100,000 samples/s • Must offer 16 single-ended or 8 differential analog inputs, expandable using master/slave configuration • Capable of providing ±1, ±2, ±5, and ±10 VFS programmable input ranges....
Product Code: AEE 10 - (16 Channel Analogue to Digital Converter)
Training software CD for AIRCRAFT SYSTEMS MAINTENANCE training....
Product Code: AEE 11 - (Training software)
