Description and Specification for Lab Tenders
Astra Scientific Single Stage Air Compressor Setup with data Acquisition.
The single-stage piston compressor and the drive unit together form a complete compressed air generation system.
generation of compressed air for industrial and commercial purposes in
areas where compressed air is used as a source of energy requires what
are known as compressed air generation plants.
A central part of these systems is the compressor. It is responsible for
generating a pressure increase of the air by means of mechanical
energy. Compressed air generation plants are used to power machines in
the mining industry, for pneumatic control systems in assembly
facilities or as tyre inflation units at petrol stations.
The drive unit powers the compressor by means of a V-belt. The speed of
the compressor is set on. The air is sucked into the intake vessel,
where it settles before it is compressed inside the compressor. The
compressed air is then delivered to a pressure vessel and is available
as a working medium. To set a steady flow-operating mode, the compressed
air can be discharged over a blow-off valve with a silencer. A pressure
switch with a solenoid valve for limiting the pressure and a safety
valve complete the system.
FEATURES:
• setup and operating behavior of a compressed air generation system with single-stage piston compressor
• determination of the characteristic curve
• determination of the volumetric efficiency
• determination of the mechanical efficiency
SPECIFICATION:
Compressor, 1 cylinder, single-stage
• power consumption: 750W
• nominal speed: 980min-1
• positive operating pressure: 8bar
• pressure: 10bar
• intake capacity: 150L/min at 8bar
• borehole: 65mm
• stroke: 46mm
Safety valve: 10bar
Pressure vessel
• 16bar
• volume: 20L
Intake vessel: 20L
Measuring ranges
• temperature: 1x 0…200°C / 1x 0…100°C
• pressure: 0…16bar / -1…1bar
• flow rate: 0…150L/min
• speed: 0…1000min-1
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase