The analyzer set-up consists of the following components:
• The following components are contained in the VersaCase III as shown above using the support brackets.
• Graduated Glass Burette which is water jacketed for temperature stability.
• Three glass Absorption Pipettes containing absorbing reagents.
• The three pipettes are connected to the 3 compartment Tedlar® bag,
which is hung behind the pipettes, by way of the valves on the gas
expansion bag.
• A liquid filled Leveling Bottle that is used to move the sample through the Burette and Pipettes.
Description
Squeeze Bulb Pump.
Solid Cap with #18 Threads and Seal.
#22 Solid Cap, #22 Threads with Seal
Bored Cap with #30 Threads, 22 mm ID.
Silicone Seal Ring #30 Threads, 22 mm ID.
Burette, with 3-way Valve and Water Jacket, PTFE ValveBody, 100 mL, Scale 0-30% x .01.
Aspirator Bottle.
Contact Pipette, Valved, Insert Only.
Pipette Bottle with Hose Barb.
Gas Sampling Bag,Three Compartment with three Poly Valves.
Black Rubber Tubing, 5/16” OD x 3/16” ID, per foot.
2 inch tube clamp, green, w/ brass knurled nuts.
VersaCase Mounting Plate.